To Set Your Filter Up,The Buckles (1) And (2) Should Be Unclipped From The Main Body Of The Filter Head This Will Then Separate The Head From The Base Of The Filter.<br>You Can Then Access Your Filter Trays To Be Clean The Filter Media Or Add Filter Media.<br>Repeat Step One To Refasten The Filter Head To The Base Of The Filter.<br>Push The Inlet And Outlet Taps Into The Filter Head And Fasten Using The Small Handle In Between The Taps This Is Also The Shut Of Valve.<br>After This Attach Your Hose To Each Tap And Secure Using The Screw Caps.<br>According To The Diagram Then Attach The Input Downpipes And Output Spraybars.<br>According To The Diagram Then Press Down The Blue Primer Button On Top Of The Filter Head This Will Prime The Filter Drawing Water In Through The Hose. |